Mikrotik: Konfigurasi EOIP Network Tunnel

             Assamu'alaikum wr.wb

TOPOLOGI 

1. pertama open console router 3 lalu tambahkan bridge,IP Address,DNS,NAT, dan dhcp-server.

<in bridge add name= bridge1 

in bridge port add=interface=ether2 

bridge=bridge1

int bridge port add interface=ether3

bridge=bridge1 

IP add add address=172.16.11.1/24

Interface=bridge 1

IP DNS set allow-remote-requests=yes

IP ferewell nat add chain=srcnat out-

interface=ether1 action=masquerade

IP hdcp-server setup

(interface=bridge 1)

2. Open console router 1 tambahkan IP Client1,DNS,dan Nat.

 <IP add add addres= 10.10.10.1/24

Interface= ether2

IP DNS set allow-remote-requests=yes

server=8.8.8.8

IP firewall Nat add chain=srcnat out-

interface=ether 1 action=masquerade

int EOIP add name="R-A" 

int bridge add name=J1 

int bridge port add bridge=J1 

interface=ether2

int bridge port add bridge=J1 

interface=R-A

3.Open console router 2 sama seperti step-2

<IP add add addres =10.10.10.3/24

interface=ether2

IP DNS set allow -remote-requests=yes 

Server=8.8.8.8 

IP firewall Nat add add chain=srcnat out-

Interface=ether1 action=masquerade

Int EOIP add name="R-B" remote-

int bridge add name=J2

int bridge port add bridge=J2

interface=ether2

int bridge port add bridge=J2

interface=R-B

4.Selanjutnya open console pada PC1 lalu 

Tambahkan (IP 10.10.10.2/24 10.10.10.1)jika sudah coba lakukan ping 

8.8.8.8 dan ping 

5.Ip 10.10.10.4/24 10.10.10.3, Lakukan sama seperti ping 8.8.8.8.

             Sekian dari saya Terimakasih

Wassalamu'alaikum wr.wb